Ethernet CAT6 and POE Units
Installing TPS surge suppression products
on Ethernet wires that leave the house will
assure that damaging transients and surges
do not enter on these line and destroy
electronics inside the home. Units should be
installed as the wires leave the house
assuring that the network and its wiring are
protected inside the house. Lighting will
not only destroy electrical equipment but it
can also destroy wiring. Protecting outdoor
equipment is accomplished by placing a unit
in front of the outdoor hub or router.
Please note that isolating outdoor
electronics from building steel and or any
additional grounding point is necessary to
assure that near lighting strikes do not
take out equipment by traveling down
building or metal structures & fences.
|